Compact floodlight head (adjustable tilt/swivel for accurate aiming).
Compact main body to which floodlight head is fixed to.
On/off mode switch on main floodlight body.
24 super bright Cree LED's providing approximately 20-30 watts of incandescent light.
Each LED provides 6 Lumens at source. Total 192 Lumens.
Integral high capacity 4 volt 4.5 Amp/Hour sealed lead acid rechargeable battery (replaceable).
Built-in photocell for automatic night time operation.
High quality 4 watt solar panel (attaches to floodlight main body or can be easily detached and located elsewhere).
Detachable solar panel can be separated up to 12' (4 metres) away with cable cord supplied.
All plastic ABS construction, no parts to rust.
Gray colored finish.
Normal operating range is -20 deg. C to + 60 deg. C.
Easy to install almost anywhere but best used in sheltered locations with limited exposure to weather.
Should provides illumination of an area up to approx. 20' x 20' and beyond to the extent of what a 20-30 watt light fixture can provide.
May be used to illuminate a sign up to approximately 6' x 4' or maybe bigger depending upon location of sign and/or fixture and to the extent of what a 20-30 watt light output can provide and subject to that amount of light being acceptable.
Can be wall or ground mounted.
Operates up to 8 hours, or more, during the hours of darkness, in ideal conditions, although we are unable to guarantee an specific illumination duration.
Typically about 4-5 hours of sunshine daily is required to enable full charge.
Product dimensions (main body) approx. 7.5"x3.5"x2.5" (LxWxH) and (floodlight head) approx. 5.5"x3.5"x2.5" (LxWxD).
Solar cell panel dimensions approx. 13"x7"x1" (LxWxD).
The pair of metal ground spikes that are supplied are approximately 7" (180mm) long.
The light output is 20-30 watts. If this output will not be sufficient for your needs then you may wish to consider some of our other products such as our FL06, FL05 or FL10 fixtures which are all considerably brighter.
This product is for light use and suitable more so for residential applications. If you need a more heavy duty fixture, or for commercial applications, you may wish to consider our FL06, FL05, FL09 or FL10 floodlights, which are a higher grade, all alumnum fixture and much more weather resistant.
Time length of night time illumination is estimated and subject to various factors including geographic location, seasons, weather conditions & location of product etc.
Shorter illumination time due to one or more of the above factors does not define the fixture as being defective or define the fixture as being advertised incorrectly.
We advertise and supply our solar lights to customers all over the world are therefore, naturally, we are unable to guarantee the nightly illumination time as it can vary and any time stated is quoted as 'up to' x amount hours.
Minor errors & omissions must be accepted.
Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice.
Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the fixture as being defective or 'not as described'.
Naturally, the illumination duration (light-up time) of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. This does not define the fixture as being defective or 'not as described'.
The required level of illumination for a sign or general area can vary from customer to customer. Each customer may have their own requirements and expectations. Therefore the information provided here shall be used only as a guide. For applications where more intense lighting is required on a sign, or in a general area, more than one fixture may be required. Likewise, for locations where there is already a large amount of ambient lighting, to illuminate a sign or general area more visibly, more intense lighting may be required to overcome the ambient light levels. Therefore more than one fixture may be required.