Manufactured in an ISO9001:2000 'Quality Assured' facility.
High quality product for residential or commercial applications.
Illuminates for up to 10 hours or more.
3 Integral Ni-Cad rechargeable C-type batteries (1.2v 2800mAh), included and easily replaceable when necessary.
Twelve super bright, high output white colored LED bulbs.
Internal convex and concave reflectors for optimum light output.
High quality 2.5 Watt solar panel.
Built-in photocell for automatic dusk-to-dawn operation.
All aluminum construction, no parts to rust.
Internal on/off switch.
Easily installed onto almost any horizontal solid surface.
Base plate of bollard has 4 pre-drilled holes for screw-down or bolt-down installation.
Supplied with a template.
Bolt pattern is approx. 7" hole to hole and approx. 8" on diagonal.
Four bolts and anchors for installation, are included.
Black powder coated finish.
Can be re-painted if required, or as when necessary.
Other colors available via special order only and for very large quantity orders only (white, brown, green etc.).
630 Lux at source.
Approximately 6.7 Lux at ground level 1' from bollard, 8 Lux at 2', 7 Lux at 3', 5 Lux at 4', 3 Lux at 5', 2 Lux at 6', 1.7 Lux at 7', 1.5 Lux at 8', 1 Lux at 9' and 0.8 Lux at 10'.
Approximately 6 Lux at ground level 1 metre from bollard, 2 Lux at 2 metres and 1 Lux at 3 metres.
Spacing is always at the discretion of the installer or as per requirements.
Spacing at 12' apart would typically achieve an approximate 2 Lux light distribution pattern along a walkway.
Spacing at 16' apart would typically achieve an approximate 1.5 Lux light distribution pattern along a walkway.
Entire fixture stands approximately 33" (84cm) high.
Main body (column section) is approximately 6" (15cm) diameter.
The clear lampshade section is approximately 7" (18cm) diameter and the lens is approximately 8" (20cm) high.
The top section of the bollard is approximately 9" (23cm) diameter.
The base section of the bollard is approximately 8" (20cm) diameter.
Time length of night time illumination is estimated and subject to various factors including geographic location, seasons, weather conditions & location of product etc.
Shorter illumination time due to one or more of the above factors does not define the fixture as being defective or define the fixture as being advertised incorrectly.
We advertise and supply our solar lights to customers all over the world are therefore, naturally, we are unable to guarantee the nightly illumination time as it can vary and any time stated is quoted as 'up to' x amount hours.
Minor errors & omissions must be accepted.
Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice.
Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the fixture as being defective or 'not as described'.
Naturally, the illumination duration (light-up time) of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. This does not define the fixture as being defective or 'not as described'.