FL30 Solar 144 LED Tube Sign Light System (4 to 8 Fixtures)
- Product Code: FL30 Sign Light
- Availability: In Stock - Call To Order
Our commercial grade solar sign lights system incorporates multiple, efficient LED tubes. Sold as a complete plug & play kit, including solar panel, MPPT charge controller, batteries, solar panel, and all other necessary components. Easy to install. Choice of lamp options.
This light system consists of four, five, six, seven, or eight weather proof 144 Cree LED light tubes, each providing 1152 lumens. The kit is supplied with a chosen number of lights, a metal battery box, a programmable MPPT charge controller, a 180 Watt solar panel with mounting brackets and two 12 Volt rechargeable batteries. For installations in locations that experience harsh winter weather, or low sun levels, a higher powered solar panel may be required. The battery box can be locked with a padlock (not supplied), and is fitted with outlets for the lamps and solar panel to easily connect to. When the system is assembled and connected, the lights will automatically turn on at sunset and illuminate until the programmed amount of time. The charge controller can be programmed to illuminate from dusk to dawn, turn off after a certain amount of hours, or it can use a dual timer option. The dual timer allows the light to activate at dusk and illuminate for X hours, switch off, and then turn back on for X hours prior to sunrise. The solar panel and light fixtures are supplied with several feet of cable so that they can be installed a distance away from the battery box if required. The entire is system is simple plug & play installation. Color of product is white. Color of other parts of the system are grey. Color of light output is white.
Perfect for use where electricity is unavailable or where it is too expensive to install. This system can be used to internally light signs such as cabinets, notice boards, display cases, etc. The LED tube lights can be installed in any orientation within a sign, and because they do not get hot there is no chance of damaging any surfaces. System can be fitted as a new installation, or retro-fitted.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Maximum nightly illumination time for four tubes is approx. 14 hours.
Maximum nightly illumination time for five tubes is approx. 13 hours.
Maximum nightly illumination time for six tubes is approx. 11 hours.
Maximum nightly illumination time for seven tubes is approx. 9 hours.
Maximum nightly illumination time for eight tubes is approx. 8 hours.
Up to 24 hours of autonomy subject to time length of night time illumination.
Supplied with four, five, six, seven or eight weatherproof LED light tubes.
Each LED tube is fitted with 144 super-bright Cree® SMD/LED's providing approx. 1152 Lumens (per tube).
Each LED tube light has approx. 18' (5.5m) of pre-wired cable which is pre-plugged ready for easy connection to the battery box.
The small bulb holders may be directly screwed or bolted onto a solid surface, or they can be simply hung or suspended within a cabinet sign.
24 Volt dc system.
Two 12 Volt 79 Ah sealed lead acid batteries.
Batteries must be connected together in series.
A remote battery box is supplied to accommodate the batteries.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has an integral battery shelf which also houses the programmable control module.
The battery box also has sockets for each light and solar panel.
The metal battery box is approx. 22" x 14" x 8" (56cm x 36cm x 20cm) LxWxD.
The battery box has a footprint for installation of approx. 22" x 14” (56cm x 36cm) LxW.
Supplied with a 180 Watt aluminum framed solar panel.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
Solar panels may be supplied in a dual format (2 x 90W = 180W) and can be framed together as one.
Supplied with approximately 17’ (5m) of cable to connect directly to the battery box.
Mounting frames are included to allow the solar panel to attach to a vertical or horizontal surface with holes pre-drilled into each section of the frame.
Each 90W solar panel dimensions approx. 40.25” x 26.25” x 1.5” (112.2cm x 66.9cm x 3.5cm) LxWxD.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 4” x 4” x1.5” (10cm x 10cm x 4cm).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Easy to install. All connections are simply plug & play.
A pair of triangle shaped support frames are supplied for the solar panel.
Purchase a FL40 pole mount kit to attach the solar panel and battery box to a pole.
Subject to warranty registration, a limited 20 year solar panel warranty applies and a limited 5 year warranty on all other components (excluding batteries). Battery warranty (if applicable) is with the battery manufacturer.* Warranty registration is required (after purchase), otherwise a standard 30 day limited warranty will apply. After making your purchase, go to www.solarilluminations.com/registration to register your warranty.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Price:From $1749.99.||Lumen Output:1152 Lumens per tube.|
|Approximate Illumination Time:Between 14 and 8 hours.||Solar Panel Wattage:From 180 Watts.|